Help
Calculator Guides
All 15 calculators are free. The editorial and data calculators have step-by-step guides here; the camera calculators are explained on their feature pages.
This help describes CineMath 1.3, the next update. Until it reaches the App Store, the version there is 1.2.1, and some screens, calculators and shortcuts differ. What changes in 1.3
Camera
Focus, framing, lenses and exposure on set.
- Depth of FieldNear and far focus limits, hyperfocal distance, and the stop that holds two subjects in focus.Feature page →
- Field of ViewHorizontal, vertical and diagonal angle of view, and frame coverage at any distance.Feature page →
- Focal Length MatchFind the lens that gives the same horizontal view on a different sensor width.Feature page →
- ExposureEnter a stop change and see the iris, shutter angle, ISO or ND that compensates for it.Feature page →
- Close FocusMagnification, effective aperture and light loss for extension tubes; new close-focus distance for diopters.Feature page →
- AnamorphicDesqueezed aspect ratio and horizontal-equivalent spherical focal length for any squeeze.Feature page →
Data/DIT
Storage, record time, bitrate, RAID and uploads.
- Data & StorageSolve for file size, record time or bitrate, from codec presets or a camera's published data rates.Help guide →
- Upload TimeEstimate how long a file takes to upload, with a best-to-worst-case range.Help guide →
- Storage/RAIDCompare usable capacity and fault tolerance across RAID 0, 1, 5, 6 and 10 for your drives.Feature page →
Editorial
Timecode, retiming, aspect ratios and film footage.
- Aspect RatioPixel dimensions for any aspect ratio, anamorphic desqueeze, and fit or fill to a delivery size.Help guide →
- Speed ChangePlayback speed and running-time change when footage plays at a different frame rate.Help guide →
- Target LengthThe exact retime percentage that fits a clip into a target duration.Help guide →
- Timecode CalculatorAdd, subtract, multiply and divide timecode, and convert between timecode and frames.Help guide →
- Film ↔ TimeConvert film footage to running time and back, for ten formats from Super 8 to 15-perf IMAX.Help guide →
- Time LapseSet the intervalometer: shot interval, frame count and speed-up for any time-lapse.Feature page →
Looking for an older calculator?
CineMath 1.3 merged several calculators. Time to Data, Data to Time and Target Bitrate are now the three modes of Data & Storage. Frames to Timecode and Timecode to Frames are operations in the Timecode Calculator. Time to Film is the Runtime → Footage direction of Film ↔ Time, and Sizing is the Scaling section of Aspect Ratio. Saved History entries from the old calculators open in their replacements.