Z CAM E2C specs
Figures verified · Sources · Report an error
The Z CAM E2C is a cinema camera released in 2019. Its Four Thirds sensor measures 17.56 × 13.11 mm.
Its largest recording is 4,096 × 2,160 (4096 x 2160 C4K DCI). Its top frame rate is 60 fps, in 2336 x 1344 (2,336 × 1,344, ProRes / ZRAW / H.265 / H.264).
- Sensor
- 17.56 × 13.11 mm
- Top frame rate
- 60 fps
- Netflix
- Not approved
Sensor
| Spec | Value |
|---|---|
| Format | Four Thirds |
| Size | 17.56 × 13.11 mm |
| Diagonal | 21.91 mm |
| Readout | Rolling Shutter |
Recording modes
5 modes as Z CAM publishes them. Max fps is the mode’s top capture rate.
| Mode | Resolution | Codec | Max fps |
|---|---|---|---|
| 3840 x 2160 UHD | 3,840 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 30 |
| 2880 x 2880 (1:1) | 2,880 × 2,880 | ProRes / ZRAW / H.265 / H.264 | 30 |
| 1920 x 1080 FHD | 1,920 × 1,080 | ProRes / ZRAW / H.265 / H.264 | 60 |
| 4096 x 2160 C4K DCI | 4,096 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 30 |
| 2336 x 1344 | 2,336 × 1,344 | ProRes / ZRAW / H.265 / H.264 | 60 |
- — : not published for this mode.
Timecode and sync
| Spec | Value |
|---|---|
| Timecode in | No |
| Timecode out | No |
Netflix approval and status
- Netflix
- Not on Netflix’s list of approved cameras when last checked. Netflix: Cameras & Image Capture
- Status
- Current
Run the numbers
- Bitrate & File Size CalculatorFile size from bitrate and runtime, record time for a card or drive, or the bitrate that fits a target size.
- Field of View CalculatorHorizontal, vertical and diagonal angle of view, and the frame width and height at a distance. Anamorphic too.
- Focal Length Match CalculatorThe lens that gives the same horizontal view on another sensor, and the crop factor between the two cameras.
- Depth of Field CalculatorNear and far focus limits, the hyperfocal distance, and where to focus and what stop to hold two subjects sharp.
- Speed Change CalculatorPlayback speed and running time when footage shot at one frame rate plays at another.
- Timecode CalculatorAdd and subtract timecode, multiply or divide it, and convert between timecode and frames, drop-frame included.
Sources
- Z CAM E2C Official Specifications (English), Z CAM (checked )
- Z CAM E2C Official Specifications (Chinese), Z CAM (checked )
- Z CAM Resources - Z CAM E2C firmware and documents, Z CAM (checked )
- archive.org 2023-01-26 snapshot of z-cam.com/e2/updates/ - Z CAM E2C section, Z CAM. Archived copy (checked )
- Z CAM Professional Cameras, Z CAM (checked )
- Netflix Partner Help - Cameras, Image Capture Requirements and Best Practices (archive.org 2026-08-09), Netflix. Archived copy (checked )
- Z CAM E2C User Manual v1.2 (Draft), firmware 0.94, drive.google.com (checked )
- Z CAM Z-Camera-Doc - E2/spec/E2C_spec.md, GitHub (checked )
Report an error
Seen a figure on this page that doesn’t match the maker’s published specs? Send it with a link to the source. We check every report against the source before anything changes.