Z CAM E2-S6 specs
Figures verified · Sources · Report an error
The Z CAM E2-S6 is a cinema camera released in 2019. Its Super 35 sensor measures 23.40 × 15.67 mm, with 6,244 × 4,168 photosites (3.75 µm pitch).
Its largest recording is 6,244 × 4,168 (6244 x 4168 Open Gate). Its top frame rate is 120 fps, in 2868 x 1512 2.8K (2,868 × 1,512, ProRes / H.265 / H.264).
- Sensor
- 23.40 × 15.67 mm
- Photosites
- 6,244 × 4,168
- Top frame rate
- 120 fps
- Netflix
- Not approved
Sensor
| Spec | Value |
|---|---|
| Format | Super 35 |
| Size | 23.40 × 15.67 mm |
| Diagonal | 28.16 mm |
| Photosites | 6,244 × 4,168 |
| Photosite pitch | 3.75 µm |
| Readout | Rolling Shutter |
Recording modes
20 modes as Z CAM publishes them. Max fps is the mode’s top capture rate.
| Mode | Resolution | Codec | Max fps |
|---|---|---|---|
| 6244 x 4168 Open Gate | 6,244 × 4,168 | ProRes / H.265 / H.264 | 30 |
| 6144 x 3240 6K DCI | 6,144 × 3,240 | ProRes / H.265 / H.264 | 48 |
| 6144 x 2592 6K 2.4:1 | 6,144 × 2,592 | ProRes / H.265 / H.264 | 60 |
| 5760 x 3240 6K UHD | 5,760 × 3,240 | ProRes / H.265 / H.264 | 48 |
| 5552 x 4164 5K 4:3 | 5,552 × 4,164 | ProRes / H.265 / H.264 | 30 |
| 4992 x 4160 5K 6:5 | 4,992 × 4,160 | ProRes / H.265 / H.264 | 30 |
| 4096 x 2160 4K DCI Low Noise | 4,096 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 30 |
| 4096 x 2160 4K DCI | 4,096 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 75 |
| 4096 x 1728 4K 2.4:1 | 4,096 × 1,728 | ProRes / ZRAW / H.265 / H.264 | 100 |
| 3840 x 2160 4K UHD Low Noise | 3,840 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 30 |
| 3840 x 2160 4K UHD | 3,840 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 75 |
| 1920 x 1080 FHD | 1,920 × 1,080 | ProRes / ZRAW / H.265 / H.264 | 120 |
| 5120 x 2700 5K DCI | 5,120 × 2,700 | ProRes / H.265 / H.264 | 60 |
| 4800 x 2700 5K | 4,800 × 2,700 | ProRes / H.265 / H.264 | 60 |
| 4096 x 2732 4K DCI 3:2 | 4,096 × 2,732 | ProRes / H.265 / H.264 | 30 |
| 3392 x 1908 Super16 (16:9) | 3,392 × 1,908 | ProRes / H.265 / H.264 | 90 |
| 2868 x 1512 2.8K | 2,868 × 1,512 | ProRes / H.265 / H.264 | 120 |
| 3456 x 3456 | 3,456 × 3,456 | Not published by Z CAM for this raster | 50 |
| 3840 x 3840 | 3,840 × 3,840 | Not published by Z CAM for this raster | 30 |
| 4000 x 4000 | 4,000 × 4,000 | Not published by Z CAM for this raster | 30 |
- — : not published for this mode.
Timecode and sync
| Spec | Value |
|---|---|
| Timecode in | No |
| Timecode out | No |
Netflix approval and status
- Netflix
- Not on Netflix’s list of approved cameras when last checked. Netflix: Cameras & Image Capture
- Status
- Product page removed not in lineup
Run the numbers
- Bitrate & File Size CalculatorFile size from bitrate and runtime, record time for a card or drive, or the bitrate that fits a target size.
- Field of View CalculatorHorizontal, vertical and diagonal angle of view, and the frame width and height at a distance. Anamorphic too.
- Focal Length Match CalculatorThe lens that gives the same horizontal view on another sensor, and the crop factor between the two cameras.
- Depth of Field CalculatorNear and far focus limits, the hyperfocal distance, and where to focus and what stop to hold two subjects sharp.
- Speed Change CalculatorPlayback speed and running time when footage shot at one frame rate plays at another.
- Timecode CalculatorAdd and subtract timecode, multiply or divide it, and convert between timecode and frames, drop-frame included.
Sources
- Z CAM E2 Flagship Series User Manual v0.4 / FW0.98, Z CAM (checked )
- Z CAM E2-S6 Official Specifications, Z CAM. Archived copy (checked )
- Z CAM About / History, Z CAM (checked )
- Z CAM Documentation, Z CAM (checked )
- Z CAM Resources - Z CAM E2-S6 (Firmware Update / Documents), Z CAM (checked )
- Z CAM E2 Flagship Series User Manual v0.4 / FW0.98 (2026/07 upload), Z CAM (checked )
- Retired z-cam.com/e2/updates/ page (archive.org captures 2019-12 to 2025-04), Z CAM. Archived copy (checked )
- Netflix Partner Help - Cameras & Image Capture Requirements, Netflix (checked )
- Netflix Partner Help - Cameras & Image Capture Requirements, Netflix (checked )
- Z CAM developer specification S6_spec.md (imaginevision GitHub, linked from z-cam.com Developer > Github), GitHub (checked )
Report an error
Seen a figure on this page that doesn’t match the maker’s published specs? Send it with a link to the source. We check every report against the source before anything changes.