Z CAM E2-F8 specs
Figures verified · Sources · Report an error
The Z CAM E2-F8 is a cinema camera released in 2019. Its Full Frame sensor measures 35.97 × 23.98 mm.
Its largest recording is 7,680 × 4,320 (7680 x 4320 8K UHD). Its top frame rate is 60 fps, in 3840 x 2160 4K UHD (3,840 × 2,160, ProRes / ZRAW / H.265 / H.264).
- Sensor
- 35.97 × 23.98 mm
- Top frame rate
- 60 fps
- Netflix
- Not approved
Sensor
| Spec | Value |
|---|---|
| Format | Full Frame |
| Size | 35.97 × 23.98 mm |
| Diagonal | 43.23 mm |
| Readout | Rolling Shutter |
Recording modes
6 modes as Z CAM publishes them. Max fps is the mode’s top capture rate.
| Mode | Resolution | Codec | Max fps |
|---|---|---|---|
| 8192 x 3456 8K 2.4:1 | 8,192 × 3,456 | ProRes / H.265 / H.264 | 30 |
| 7680 x 4320 8K UHD | 7,680 × 4,320 | ProRes / H.265 / H.264 | 30 |
| 6144 x 3240 6K DCI | 6,144 × 3,240 | ProRes / H.265 / H.264 | 30 |
| 5760 x 3240 6K UHD | 5,760 × 3,240 | ProRes / H.265 / H.264 | 30 |
| 3840 x 2160 4K UHD | 3,840 × 2,160 | ProRes / ZRAW / H.265 / H.264 | 60 |
| 3392 x 1908 Super16 (16:9) | 3,392 × 1,908 | ProRes / H.265 / H.264 | 60 |
- — : not published for this mode.
Timecode and sync
| Spec | Value |
|---|---|
| Timecode in | No |
| Timecode out | No |
Netflix approval and status
- Netflix
- Not on Netflix’s list of approved cameras when last checked. Netflix: Cameras & Image Capture
- Status
- Listed page live not in current lineup
Run the numbers
- Bitrate & File Size CalculatorFile size from bitrate and runtime, record time for a card or drive, or the bitrate that fits a target size.
- Field of View CalculatorHorizontal, vertical and diagonal angle of view, and the frame width and height at a distance. Anamorphic too.
- Focal Length Match CalculatorThe lens that gives the same horizontal view on another sensor, and the crop factor between the two cameras.
- Depth of Field CalculatorNear and far focus limits, the hyperfocal distance, and where to focus and what stop to hold two subjects sharp.
- Speed Change CalculatorPlayback speed and running time when footage shot at one frame rate plays at another.
- Timecode CalculatorAdd and subtract timecode, multiply or divide it, and convert between timecode and frames, drop-frame included.
Sources
- Z CAM E2-F8 Official Specifications, Z CAM (checked )
- Z CAM E2 Flagship Series User Manual v0.4 / FW0.98, Z CAM (checked )
- Z CAM About / History, Z CAM (checked )
- Z CAM Documentation, Z CAM (checked )
- Z CAM E2 Flagship Series User Manual v0.4 / FW0.98 (2026/07 upload), Z CAM (checked )
- Z CAM Resources - Z CAM E2-F8 tab, Z CAM (checked )
- Netflix Partner Help - Cameras & Image Capture Requirements, Netflix (checked )
- Netflix Partner Help - Cameras & Image Capture Requirements, Netflix (checked )
- Netflix Partner Help - Cameras & Image Capture (archive.org 2026-08-09), Netflix. Archived copy (checked )
- Z CAM F8_spec.md (imaginevision/Z-Camera-Doc), GitHub (checked )
Report an error
Seen a figure on this page that doesn’t match the maker’s published specs? Send it with a link to the source. We check every report against the source before anything changes.